Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

以风化煤为底物制取生物甲烷的潜力分析

我国拥有丰富的风化煤储量,因其高度被氧化的独特性质,可应用的领域极为有限,目前主要被作为改善土壤性质的肥料和制取腐殖酸的来源。以风化煤为底物制取生物甲烷是一种具有探索性的全新生物发酵工艺,探究其可行性及模拟实验过程中风化煤的物性特征变化有利于拓宽风化煤的资源利用和环境改善,并可以进一步丰富煤生物产气理论。实验选取内蒙古乌海和山西晋城两地不同风化程度煤样,以煤层矿井水为菌种来源,在适宜环境条件下开展模拟产气实验,通过生物产气模拟和红外光谱测试,分析不同风化程度煤的生物产气能力及其内在因素,以揭示其产气潜力及物性变化特征。结果表明:①随着煤的风化程度加深,可燃基CH 4产气量明显增加,两组煤样中可燃基CH 4生成量最高分别达到7.13,4.20 mL/g;②不同风化程度的煤样均出现了产气高峰,时间基本都出现在15~30 d,各组中随着煤样风化程度不断加深,产气高峰出现时间也越来越早;③随着煤的风化程度加深,煤中芳环被不断打开,大分子结构被破坏,同时煤中羟基、氨基等基团含量趋于降低,脂碳结构逐渐解体,含氧官能团成为主要结构,氧含量比例不断增高,更容易被微生物降解;④菌群鉴定表明风化煤不仅含有大量产生生物气所需的第1阶段和第2阶段细菌,更含有甲烷杆菌属、甲烷球菌属等多种类型的产甲烷菌群,具有把风化煤转化为生物甲烷的环境条件。实验结果最终反映了风化煤具有转化为生物甲烷的潜力,并有利于提高我国风化煤的资源利用率。     

Mechanism of methanol decomposition on the Pd/WC(0001) surface unveiled by first-principles calculations

In this study, the decomposition of methanol into the CO and H species on the Pd/tungsten carbide (WC)(0001) surface is systematically investigated using periodic density functional theory (DFT) calculations. The possible reaction pathways and intermediates are determined. The results reveal that saturated molecules, i.e., methanol and formaldehyde, adsorb weakly on the Pd/ WC(0001) surface. Both CO and H prefer three-fold sites, with adsorption energies of −1.51 and −2.67 eV, respectively. On the other hand, CH₃O stably binds at three-fold and bridge sites, with an adsorption energy of −2.58 eV. However, most of the other intermediates tend to adsorb to the surface with the carbon and oxygen atoms in their sp³ and hydroxyl-like configurations, respectively. Hence, the C atom of CH₂OH preferentially attaches to the top sites, CHOH and CH₂O adsorb at the bridge sites, while COH and CHO occupy the three-fold sites. The DFT calculations indicate that the rupture of the initial C–H bond promotes the decomposition of CH₃OH and CH₂OH, whereas in the case of CHOH, O–H bond scission is favored over the C–H bond rupture. Thus, the most probable methanol decomposition pathway on the Pd/WC(0001) surface is CH₃OH → CH₂OH → trans-CHOH → CHO → CO. The present study demonstrates that the synergistic effect of WC (as carrier) and Pd (as catalyst) alters the CH₃OH decomposition pathway and reduces the noble metal utilization.     

松木颗粒热解与高温蒸汽气化半焦产率及形貌特征分析

以成型松木颗粒为原料，进行低温热解，研究了热解温度和升温速率对生成的松木半焦产率及官能团的影响。以试验得到的松木半焦进行蒸汽气化试验，对比分析了温度对半焦重整气化形貌特征、比表面积和平均孔径的影响。研究表明：随着热解温度升高，松木半焦脂肪族结构峰消失转化为烃等小分子物质及气化气，进而降低半焦产率。升温速率升高，半焦产率呈先下降后升高的趋势，在800℃升温速率为30K/min时半焦产率最低。不同温度热解和蒸汽气化对比试验表明，温度相对较低时（500℃）热解和蒸汽气化半焦孔隙结构相近，随着温度的升高，蒸汽气化半焦结构发生明显变化，900°C时出现了更小的孔道结构且比表面积增加明显。蒸汽引入使松木半焦和水蒸气发生热解反应的同时发生了脱氢反应，气化半焦形貌出现熔融和烧结现象。     

Improving hydrogen evolution reaction and capacitive properties on CoS/MoS2 decorated carbon fibers

We report a facile method to transform abundantly dumped banana stem fibers into carbon fibers (CFs) useful for energy applications. The CFs surface area is increased by varying the quantity of KOH activation to 488 m²g^-1. The solvothermal method is used to synthesize CoS, CoS/MoS₂ and also grown on the activated carbon fibers (ACFs). Nano nodules of CoS arranged into sheets and layers of MoS₂ stacked together were found in FESEM analysis. The morphology of the CoS/MoS₂ differs when grown on ACFs. The growth of CoS/MoS₂ along the ACFs length prevents any stacking of the pseudocapacitance materials. The ternary composite ACFs/CoS/MoS₂ exhibits superior supercapacitor behavior as well as hydrogen evolution reaction (HER) due to the synergetic effect of the conducting ACF surface and redox active CoS/MoS₂. A maximum specific capacitance of 733 Fg^-1, energy and power density of 33 WhKg⁻¹ and 999 WKg^-1 respectively are obtained. A low Tafel slope value of 61 mVdec⁻¹ is obtained for the ACFs/CoS/MoS₂ ternary composite electrode. The present work therefore offers a fresh insight into the effective conversion of waste materials into electrode material for energy storage and conversion applications.     

Chest X-ray enhancement to interpret pneumonia malformation based on fuzzy soft set and Dempster–Shafer theory of evidence

Image enhancement algorithms are commonly used to increase the contrast and visual quality of low-dose x-ray images. This paper proposes an automated enhancement method using soft fuzzy sets with a new decision-making scheme based on Dempster-Shafer theory of evidence for the visual interpretation of pneumonia malformation in low-dose x-ray images, called as XEFSDS. The XEFSDS model first generates an original source x-ray image into a complementary image, then each original and complement image is applied to the characterized image object and background areas of fuzzy space. The S-function is utilized to define fuzzy soft sets for the classification of gray level ambiguity in both images, and hence a decision criterion via Dempster-Shafer approach and fuzzy interval has been adapted to discriminate uncertainties on the pixel intensity and the spatial information. Modified membership grade operations have been performed on each object/background area, and Werner’s AND/OR operator (an aggregation operator) has been utilized to build a new membership function from two modified membership functions. Finally, an enhanced image is obtained from the new membership function via defuzzification. Experiments on different pneumonia X-ray images demonstrate that the XEFSDS scheme produces better results than the existing methods. To show the advantages of the XEFSDS scheme, we have executed a segmentation based examination on enhanced image for the detection of pneumonia malformation as well as abnormal lobe (lobar pneumonia) or bronchopneumonia.     

Component spectroscopic properties of light-harvesting complexes with DFT calculations

Photosynthesis is a fundamental process in biosciences and biotechnology that influences profoundly the research in other disciplines. In this paper, we focus on the characterization of fundamental components, present in pigment-protein complexes, in terms of their spectroscopic properties such as infrared spectra, nuclear magnetic resonance, as well as nuclear quadrupole resonance, which are of critical importance for many applications. Such components include chlorophylls and bacteriochlorophylls. Based on the density functional theory method, we calculate the main spectroscopic characteristics of these components for the Fenna-Matthews-Olson light-harvesting complex, analyze them and compare them with available experimental results. Future outlook is discussed in the context of current and potential applications of the presented results.     

[数据驱动的产品设计]基于功能模型和层次分析法的智能产品服务系统概念方案构建

为研究智能产品服务系统概念方案的构建，解决系统的复杂特性和功能耦合特性，提出应用发明问题解决理论（TRIZ）功能模型和层次分析法(AHP)两种工具，在概念设计阶段利用TRIZ功能模型定性地对其进行分析建模，并借助层次分析法对不同服务供应商所提供的服务功能模块进行定量的决策分析，通过择优集成相关功能模块，形成智能产品服务系统概念方案的构建方法。最后以3家服务供应商的服务功能模块构建为例，验证该方法的有效性。     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).